Tuning and modding » Denali spots

Anyone fitted Denali spotlights to a R1250RS?
Fork leg mounted? Anywhere else?
Ady

I have them on my R1200RS and use the bar that BMW offers or is available from Clearwater for mounts. This made the installation easy. I also go the brake light...very bright..much better than stock BMW

As Vtbob said, the BMW light bar or if you have the machine art moto avant guard fitted then go with the machine art moto light bars.

For either of the above you will need some adaptors to mount the Denalis to the bars.

Let me know if you need any part numbers etc?

Thanks fugly
So where does this bar fit? Who supplies it?
I can fabricate most things in stainless at work and polish. These where on my r1200r and I made the fittings..was not letting them go in the part ex , also same for Akrapovic which is now for sale.

Zitat von Adrian Nurney im Beitrag #4

---

So where does this bar fit? Who supplies it?
.

---

If you are UK based then Nippy Normans is the UK importer :o((((((

Cheers Fugly,
Nippy Norman's it is, splice into day time running lights?

Zitat von Fugly im Beitrag #3

---

As Vtbob said, the BMW light bar or if you have the machine art moto avant guard fitted then go with the machine art moto light bars.

For either of the above you will need some adaptors to mount the Denalis to the bars.

Let me know if you need any part numbers etc?

---

Anyone out there in RS land mounted Denali's to a MachineArtMoto light bar? I know it will require a U type adapter. Not much luck finding one yet and wondering if this will turn into another DIY project.

Zitat von duccrazydave im Beitrag #8

---

Zitat von Fugly im Beitrag #3

---

As Vtbob said, the BMW light bar or if you have the machine art moto avant guard fitted then go with the machine art moto light bars.

For either of the above you will need some adaptors to mount the Denalis to the bars.

Let me know if you need any part numbers etc?

---

Hey Fugly. I have the bars now. Where do I source this adapter bracket to mount the Denali lights?

---

Thanks for the direction, Fugly! After I made my own brackets, I found the ones you mentioned, on the Twisted Throttle website. Here’s the link for any other Yanks on the forum with MAM bars.
https://www.twistedthrottle.com/denali-l...bmw-motorcycles

Zitat von duccrazydave im Beitrag #8

---

Zitat von Fugly im Beitrag #3

---

As Vtbob said, the BMW light bar or if you have the machine art moto avant guard fitted then go with the machine art moto light bars.

For either of the above you will need some adaptors to mount the Denalis to the bars.

Let me know if you need any part numbers etc?

---

Hey Fugly. I have the bars now. Where do I source this adapter bracket to mount the Denali lights?

---

I have a pair of Denali D2s on my RS using the MaMo bars and did not need any adaptors. The U-fitting on the lights fits the bars with a suitable bolt and lock washer to stop them moving. Only allows left and right adjustment at the mount but there is a bit of up/down movement in the MaMo bars for fine adjustment.

Zitat von OldSteve im Beitrag #13

---

I have a pair of Denali D2s on my RS using the MaMo bars and did not need any adaptors. The U-fitting on the lights fits the bars with a suitable bolt and lock washer to stop them moving. Only allows left and right adjustment at the mount but there is a bit of up/down movement in the MaMo bars for fine adjustment.

---

A couple of photos attached. The bolts I used are 60mm long and the same size/thread as the ones supplied by Denali which I cannot remember off hand I am afraid.

IMG_1869.jpeg - Bild entfernt (keine Rechte)IMG_1868.jpeg - Bild entfernt (keine Rechte)