RE: Denali spots - 2

I have the same setup: Mamo bars w/ Denali spots. Have mine mounted slightly narrower, centered on the brackets.

I wanted mine further apart for maximum "be seen" visibility. Also, I see you have used an extra bracket between the MaMo bar and the light - I just removed the D2 fitting and used a through bolt to attach mine.

Zitat von duccrazydave im Beitrag #16

---

I have the same setup: Mamo bars w/ Denali spots. Have mine mounted slightly narrower, centered on the brackets.

---

I just got my two piece Mamo bars yesterday. My D2 denali's shouldn't need the bracket.

Question for those who've use these bars-- no bolts to bolt to the frame came with mine. Looking for black bolts if possible, and need the bolt dimensions if I have to buy them at the local hardware store. Or a supplier of just the bolts for these brackets,

Thanks

Zitat von azqkr im Beitrag #19

---

I just got my two piece Mamo bars yesterday. My D2 denali's shouldn't need the bracket.

Question for those who've use these bars-- no bolts to bolt to the frame came with mine. Looking for black bolts if possible, and need the bolt dimensions if I have to buy them at the local hardware store. Or a supplier of just the bolts for these brackets,

Thanks

---

Zitat von Lee im Beitrag #20

---

Zitat von azqkr im Beitrag #19

---

I just got my two piece Mamo bars yesterday. My D2 denali's shouldn't need the bracket.

Question for those who've use these bars-- no bolts to bolt to the frame came with mine. Looking for black bolts if possible, and need the bolt dimensions if I have to buy them at the local hardware store. Or a supplier of just the bolts for these brackets,

Thanks

---

Looking at their website it should have come with hardware.

Position each Light Mount as shown.
Apply a small amount of blue Loctite to
screw threads and fasten with supplied
hardware.

1 - Left Light Bar
1 - Right Light Bar
2 - M8 x 35 Cap Screws
2 - Nuts
4 - Washers

---

Zitat von Lee im Beitrag #18

---

Zitat von duccrazydave im Beitrag #16

---

I have the same setup: Mamo bars w/ Denali spots. Have mine mounted slightly narrower, centered on the brackets.

---

Was the extra bracket needed to get a proper aim left to right?

---

Zitat von OldSteve im Beitrag #13

---

I have a pair of Denali D2s on my RS using the MaMo bars and did not need any adaptors. The U-fitting on the lights fits the bars with a suitable bolt and lock washer to stop them moving. Only allows left and right adjustment at the mount but there is a bit of up/down movement in the MaMo bars for fine adjustment.

---

Zitat von Lee im Beitrag #20

---

Zitat von azqkr im Beitrag #19

---

I just got my two piece Mamo bars yesterday. My D2 denali's shouldn't need the bracket.

Question for those who've use these bars-- no bolts to bolt to the frame came with mine. Looking for black bolts if possible, and need the bolt dimensions if I have to buy them at the local hardware store. Or a supplier of just the bolts for these brackets,

Thanks

---

Looking at their website it should have come with hardware.

Position each Light Mount as shown.
Apply a small amount of blue Loctite to
screw threads and fasten with supplied
hardware.

1 - Left Light Bar
1 - Right Light Bar
2 - M8 x 35 Cap Screws
2 - Nuts
4 - Washers

---

Zitat von Fugly im Beitrag #23

---

Zitat von OldSteve im Beitrag #13

---

I have a pair of Denali D2s on my RS using the MaMo bars and did not need any adaptors. The U-fitting on the lights fits the bars with a suitable bolt and lock washer to stop them moving. Only allows left and right adjustment at the mount but there is a bit of up/down movement in the MaMo bars for fine adjustment.

---

That and the DENALI DM are the only lights that will mount like that, I am not a fan of the big M8 fixing s they use and the necessity of the mount adapter plates but hit main beam on the D4's and all is forgiven

---