RE: Attaching Kriega bag so it sits on pillion seat? - 2

Zitat von Lee im Beitrag #2

---

I'm guessing the back two straps can attach to the passenger grab rails.
For the front two strap you can make a couple loop from nylon straps and use existing screws under the pillion seat to hold the loops.
When not in use flip them under the seat.

The photo attachment is not working. I'll try later so you can see what I mean.
Click on the picture name to see the full size picture.

---

Zitat von BEARR im Beitrag #16

---

Zitat von Lee im Beitrag #2

---

I'm guessing the back two straps can attach to the passenger grab rails.
For the front two strap you can make a couple loop from nylon straps and use existing screws under the pillion seat to hold the loops.
When not in use flip them under the seat.

The photo attachment is not working. I'll try later so you can see what I mean.
Click on the picture name to see the full size picture.

---

Thanks for the tip, Lee. I did this on my new RS, just home on Friday. Does the job...

I have a question, though. Is that screw we're using to attach the webbing just a screw to attach the underseat "liner" to the subframe? With the webbing, and the short screw, I couldn't obviously get the screw as deeply into the threads as without the webbing. Just want to be sure that screw is not "structural" in any way. Thanks.

---

[/quote]

I used those screws on our 2016 bikes and they stayed in place.
Check it from time to time and you should be able to see if the screw is backing out.
I thinks that's one of the screws that holds the plastic side trim piece. The painted piece.[/quote]

The screws are in fairly tight, so not concerned. Will check from time to time, though. Thanks again.