R1200RS + R1250RS Forum
Print view
Sun Jun 07, 2020 8:17 pm
reply
|
Be aware LSL produce a kit to convert the bars to R style I fitted mine a few years back and very pleased with results. End weights used were small after market quality items and importantly don't forget to reroute the clutch hose to prevent straining on full lock just tap in to the tube and you will find instructions. |
|
Zitat von Ady im Beitrag #8 Hi Ady, can you say how much up and back it has moved?? |
|
|
Wunderlich do a bar replacement kit for the RS: https://www.wunderlich.de/shop/en/wunder...-31000-502.html
Fred
|
|
|
A little difficult to measure but see post other for picture comparison. I would estimate around 3 inches higher and 2 inches further back. For me this made the difference in control firstly because my wrists were now at a better angle and secondly because the position of my forearm was now naturally set at horizontal to the to the ground with a bend at the elbow. |
|
|
Should have added UK agent for LSL and bar ends in last response. |
|
Zitat von Ady im Beitrag #13 Looks like a good option, though pictures appear to be of it fitted to the R model which already has the correct clamps, so it is not clear whether the bars come with suitable clamps for the RS.
Fred
|
|
