R1200RS + R1250RS Forum
»
1200 RS technology
»
General topics
»
Vibration after adding Wunderlich risers 25mm.
Print view
|
I get this vibration at 4,000 rpm + on the right grip after the dealer installed a pair of risers. I am going to bring it back to check torque specs and also check the balance the front wheel. Anything else I should be looking at. It is a slight vib but on the long run, my left hand gets numb. I use the cruise and release the grip on the gas but that doesn't solve the actual problem. Any suggestion would be appreciated.
Life is a long motorcycle ride that you wish will never end.
|
|
reply
Thu Jul 05, 2018 11:29 pm (Last edited: Thu Jul 05, 2018 11:47 pm)
|
Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.
Zitat von albrown im Beitrag #1 Grip Buddies do improve it, but I have them and I have numb fingers on long runs, I try to release the grips between pot holes to reduce the problem, but foam grip Buddies do help. https://rover.ebay.com/rover/0/0/0?mpre=...%2F281344765069 Ged 2017 RS grey/white/red. |
|
Thu Jul 19, 2018 3:33 pm (Last edited: Thu Jul 19, 2018 3:39 pm)
|
It took HeliBar risers, non-binding/pre-curved riding gloves, and a more relaxed grip to keep my hands from becoming numb on my RS. Even with the risers, the reach to the handlebars is two inches further away from the nose of the seat compared to my very comfy '03 Bonneville. It makes the bike perfect at speed, but my hands tingle a bit after riding in town for a while... “I would rather be ashes than dust!" ~ Jack London |
|
|
I have the Wunderlich risers on my RS and have had no issues with vibration.
Current motorcycle collection: 2002 Yamaha FZ1; 2005 Triumph Bonneville T-100; 2011 Royal Enfield Bullet 500; 2009 BMW F650GS; 2016 BMW R1200RS; 2011 Zero S 16.6 kWh
|
|
Zitat von Richard230 im Beitrag #6 I also have been using the Wunderlich Risers since late last year without any noticeable vibration issues.
2016 BMW R1200RS
|
|
