accessories » Fitting K1200/K1300S/R panniers.

Fitting the expandable panniers from the K series to the R/RS is perfectly possible. Several people kindly contributed experience, knowledge and skills on the previous forum. Just wish I'd read it fully..... Quick points are;

You need K12/1300 panniers with the exhaust cutout to starboard. The expandable panniers from the chain bike (ST) will fit but you lose even more space.
The look is sort of 'skeletal' due to the design allowance for the curvature of the K tail piece but I think it's OK
They're still inside the handlebar width and I've had no problems filtering

Photos;
WP_20180702_14_31_57_Rich.jpg - Bild entfernt (keine Rechte)WP_20180702_14_33_26_Rich.jpg - Bild entfernt (keine Rechte)WP_20180702_14_33_46_Rich.jpg - Bild entfernt (keine Rechte)WP_20180702_14_35_28_Rich.jpg - Bild entfernt (keine Rechte)WP_20180702_14_36_55_Rich.jpg - Bild entfernt (keine Rechte)

Me too

What other panniers match R1200rs?

Zitat von Paul666 im Beitrag #3

---

What other panniers match R1200rs?

---

Do the BMW S1000xr panniers fit P&P to the R1200rs?

Panniers from the BMW F800GT will be mounted in R1200rs?

Here's mine I had posted on the old RS site.

Zitat von Paul666 im Beitrag #6

---

Panniers from the BMW F800GT will be mounted in R1200rs?

---

I managed to grab a set off Ebay, should be with me tomorrow, I will let you know how I get on, but it looks like you have just made a lowering plate so the original panier bracket sits lower and thus onto the RS panier rails. I will let you know how I get on.
Thanks Pops

I've done it. I have also put a kick in the plate, so this puts the panniers closer to the frame. The secret is to make cardboard templates first, then once happy, transfer template to your plate. I used 3mm alluminium.I will try and post some pictures.

Here's the adapters I made, if you're interested.

By the way, I'm going to be selling these panniers with or without the adapters as I just traded my bike for '18 GS Rallye. Will be listing them in the buy and sell section and/or on the big auction site.

013.jpg - Bild entfernt (keine Rechte)015.jpg - Bild entfernt (keine Rechte)015.jpg - Bild entfernt (keine Rechte)003.jpg - Bild entfernt (keine Rechte)007.jpg - Bild entfernt (keine Rechte)006.jpg - Bild entfernt (keine Rechte)

Zitat von ibrockn im Beitrag #11

---

Here's the adapters I made, if you're interested.

---

1300's the 800's are too small hinted at elsewhere on this forum