How do people mount their flat surface lights to the aux light bracket?

Got the MaMo brackets for aux lights up front. I want to put Rigid D2's on, but the mount is for a flat surface as many lights are. So, wondering how people are solving this problem. It's got to be a bar mount with flat surface to mate the base of the light to. Looking for suggestions. Some of the bar brackets that would seem to work get fairly bad reviews where not moving on the bar is concerned. Thanks

I bought these: https://www.amazon.co.uk/Additionnels-an...U/dp/B07175911B

Fitted on the MaMo bars (just a tiny bit of filing required) and are dimmable with my CanBus controller, even though they're 2 wire!

Hope that helps a little.

Cheers

Paul B.

Paul, I want to use the Rigid D2's, I'm looking for solutions to mount those to round stock [ my light brackets ].

There's got to be a solution other than buying lights I don't want. Appreciate the reply/suggestion

If you are talking Denali D2's, you can remove the M8 mounting hardware and the use the M6 bolts directly through the MaMo bars.

If you want to keep the M8 mounting hardware then you will need these: https://moto-mate.com/shop/lights-and-ac...mw-motorcycles/

Apologies, I have just looked at the Rigid D2 and now understand they are not the same as the Denali units.

So I guess it will be the adaptors I linked to above

Zitat von Fugly im Beitrag #5

---

Apologies, I have just looked at the Rigid D2 and now understand they are not the same as the Denali units.

So I guess it will be the adaptors I linked to above

---

Decided to go with Denali D2's, they'll mount right up to the MaMo bars/hangers.

Zitat von azqkr im Beitrag #6

---

Zitat von Fugly im Beitrag #5

---

Apologies, I have just looked at the Rigid D2 and now understand they are not the same as the Denali units.

So I guess it will be the adaptors I linked to above

---

Thank you sir, that mount adapter will work. Still not sure if I want the Denali's or the Rigids. Decisions, decisions.

---