R1200RS + R1250RS Forum
Topic settings 
Print view
Jump to forum
Fri Oct 02, 2020 6:56 pm
|
New 2020 R1250RS. White plug with a black cap on it to the right and just behind the steering head. It has two wires, brown and white going into it. Anyone know what it is? |
|
reply
|
That didn't work. |
|
|
Thanks Boxter, After further research it seems that it comes from the GPS cradle. |
|
Zitat von fred_jb im Beitrag #6 I wonder if it could be modded to accept a line out jack.
I’m a Notary Public. RESPECT MY AUTHORITY!
|
|
Zitat von zer0netgain im Beitrag #7Zitat von fred_jb im Beitrag #6 Yes, that is exactly what I did on my first GS. I just bared a bit of insulation on each of the two wires and soldered on the wires from an audio socket, leaving the original connector in place. I was then able to plug some phone headphones into that to test it. You should connect a socket (female connector) rather than a plug (male connector) to this wiring to avoid the danger of shorting it out on something from exposed plug contacts. The reason for doing this was that I had found it impossible to share satnav announcements between mine and my wife's headsets while maintaining an intercom session between us. My idea was to take the line out and use it to feed a separate Bluetooth transmitter paired to my wife's headset, leaving my headset to receive audio directly from the satnav over Bluetooth. Unfortunately my plan was foiled by the unforeseen issue that the Nav V would only output audio on its line out connection if audio on Bluetooth was disabled. So, either one or the other outputs could be active but not both!
Fred
|
|
