Exhausts and Engine » Sc project Sc1r slip on can

Hi all. New to the forum and new to r1200rs. I pick up my 16, 66 plate, rs next week and really like the sc1r can but their website says for 17/18 bikes and not 15/16.

Are the exhausts on the new bike slightly different or will this fit my 16?

Even better has anyone fitted one.

Cheers.

Hi Pete,

I am running the oval SC-Project on my 2016 RS and it's a perfect fit. This is not the SC1-R but it has an amazing exhaust note and shaves a ton of weight and I would buy it again!. I posted a photo so that you can see my exhaust in case that helps determine if the SC1-R will fit your bike. SC-Project says the SC1-R won't fit and I believe this is because of the fixed mount on the SC1-R. Unless the kit comes with the stainless steel bracket that you see in my photo that mates up to your stock exhaust hangar located on the right passenger footpeg it doesn't seem like it is going to work on the earlier bike at first glance. Perhaps check the part numbers on the right passenger footpeg bracket and see if the same part number is used from 2015-2019. Good luck and let us know if you pull the trigger and have success with this slip-on.

SC-Project Part # that I am using:
Black stainless steel with carbon cap (B22-01O)
Titanium with carbon cap (B22-01T)
https://www.sc-project.us/bmw-r1200r-ova...ttribute_values[237]=null


IMG_3880.JPG - Bild entfernt (keine Rechte)

Looks nice! Thanks I'll have a check when I pick the bike up.

What gps mount have you got on your bike. I want to get mine mounted in that position too?

Cheers.

The GPS mount is a one-off. I used a universal ram mount ball base and the universal RAM GPS mounting plate and their shortest arm to connect the two. If you want to go down this path drop me a message and we can go over how you attach the mount to your bike. It is an inexpensive and simple approach to solve the problem with the OEM mounting location. Also, search the forum for Nav mounts because there are some other very clean billet aluminum mounts now in production that place the Nav in the ideal location as well. Enjoy your new bike.

Zitat von CK_AZ_SB im Beitrag #4

---

The GPS mount is a one-off. I used a universal ram mount ball base and the universal RAM GPS mounting plate and their shortest arm to connect the two. If you want to go down this path drop me a message and we can go over how you attach the mount to your bike. It is an inexpensive and simple approach to solve the problem with the OEM mounting location. Also, search the forum for Nav mounts because there are some other very clean billet aluminum mounts now in production that place the Nav in the ideal location as well. Enjoy your new bike.

---

Zitat von Pete1200rs im Beitrag #3

---

What gps mount have you got on your bike. I want to get mine mounted in that position too?

---

Anyone got a clear answer on the SC1-R on a 2016 bike?
It does appear that there was a change in part no of the Exhaust manifold from Aug 2016 onwards,

Yep fits no problem, 2016 bikes were subject Euro 4 and this could have been driver for part number changes. SC sold exhaust at 1/2 price at end of 2016 probably to clear stocks and make way for the new style cone shaped with compulsory fixed baffles. I purchased direct from factory and it fits a treat. Note you can also tweak angle a little and do away with the connecting metal strap between exhaust hanger and foot peg just fit exhaust clamp directly to foot peg for a clean look.
In my experience if you mod any further than this such as header change and decat then you will need remap because 2016 bike are very lean fuel wise to meet Euro 4, indeed mine used to pre ignite (pink) as standard under certain load and temperature conditions.

I run with baffle in place and find sound to be acceptable with just a nice bark on initial acceleration but nothing to turn the heads of others around me. Regarding exhaust noise I have a new neighbour who runs a Harley sportster on open pipes and it brings it home to me just how offensive excessive noise can be to other’s including my self a life long enthusiast of all things 2 wheeled.

I should clarify, my bike was purchased November 2016 but is euro 4 2017 build spec as factory changes apply from September 2016. SC -1 will fit 2016 and 2017 no problems. If further fit pictures required I will upload a more detailed shot.

Ady,

I think your can is not the SC1-R that I am looking at but I did note, from the parts list, the exhaust manifold changed at Sept 16 - If that was for a Euro 3 to 4 change then I guess it may have been the Cat or something that did not affect the external shape etc. It would be great if you were able to take some photos of the silencer end of the Euro 4 manifold to see if there are any changes there - that may affect fitting of the later can. I will drop you a PM with photos of my 2016

SC Project have said the SC1-R has not been installed or homologated for the '15-16 bikes......but I still figure that it will physically fit......just want to make sure before ordering

My mistake it’s the newer version you talk about, but I can assure you there was no change in fittings until 1250 variant changed headers all previous models were the same up to this point.
I’ve searched but have no suitable pictures and I currently have Akro headers fitted so perhaps not the picture you require.

I ordered an SC1-R this afternoon having come to the same conclusion about 15/16 bikes vs 17/18.

Hi all is the SC project slip on a R & R (remove and replace) without the need for any additional tuning or ???

SC1-R arrived today and unsurprsingly fitted straight on to the bike - 2016 variant (inc the heatsheild).

Sound is not significantly different from the OEM silencer - perhaps a little deeper. There are a couple of fixed, welded baffles as supplied by SC-Project (one on the back of the link pipe and one at the end of the silencer). I didn't want a loud bike so this suits me fine.

Looks a whole lot better on the bike than the OEM Chrome that was there before.

2022-06-28_06-58-04 by jeznewsome, on Flickr

I’m going to order up the SC1R for my 2016. It sounds like there won’t be any issues with tuning or pannier fitment. It looks awesome. Thanks Jeznewsome pix and everyone else on the forum.