RE: Akrapovic for R1250RS - 3

Zitat von Mark im Beitrag #30

---

Here my solution [[File:20190401_104400.jpg]]
the headers are Akrapovic, muffler is OEM both have ceramic coated in satin black.

---

It may not look good but it's effective. So the answer is YES

Zitat von L2RKE im Beitrag #27

---

Its massive.

---

I am curious if an older version Akrapvic slip on for a 2015-16 R1200RS (Euro3) would fit on a 2020 R1250RS? I was looking for a Akr slip on with a single outlet and removable baffle.

Zitat von OlieL im Beitrag #33

---

I think the Akro is a similar length to the original but is definitely narrower widthways and top to bottom than the massive fat ugly chromed thing that would have come as standard on my Exclusive.
It's not that loud, but pops nicely on the overrun.

---

I fitted a RS1200 SC Project slip on - the pipework fits fine but the 1250 has the exhaust valve cover integrated with the heel guard cover. On the 1200 they are separate. The good news is you can just get hold of a 1200 exhaust valve cover (GS's use the same one, I got a second hand one) as the cover mounts are still on the headers

Zitat von archander im Beitrag #34

---

I am curious if an older version Akrapvic slip on for a 2015-16 R1200RS (Euro3) would fit on a 2020 R1250RS? I was looking for a Akr slip on with a single outlet and removable baffle.

---

I was concerned about the angle of the Akr bracket and exhaust hanger fitting, but if the new ones fit the older one, it must be the same or close enough.

Anybody know of a dealer in the US where you can order an Akra can for the R1250RS?

My dealership got not only the slip-on, but the complete Akrapovic system fitted (the ECE approved titanium version).
It just passed 1000 km so run in completed.
Let the noise begin.

Hey Steviejuk :-)

Do you have any pictures showing your exhaust on the bike?

I am looking to change mine once i pick it up on Saturday, but not sure which one to go for as yet.

Cheers

I'm looking for a supplier in the USA.

Black Akro5F49FC48-041A-457A-AEA7-24C104725241.jpeg - Bild entfernt (keine Rechte)

The 2015 Akrapovic Titanium slip on (S-B12SO14-HLGT) Euro-3 with removable baffle fits!! Lots of Akra can be found on Ebay and was shipped to CA. The 1250 has the exhaust valve cover integrated with the heel guard cover. On the 1200 they are separate. I ordered the Akra carbon one, but used a 1200 GS exhaust valve cover which needed minor cuts to fit (thank you Steviejuk!)

Sounds great on acceleration, does pop a little with baffle out, but at highway cruising speeds not any louder than the stock.

Going with the headers next.....




1DBC1F78-6BB6-49E0-9D75-6305E46D574B.jpeg - Bild entfernt (keine Rechte)

Is this the part you need?
https://www.motorworks.co.uk/vlive/Shop/..._JA_25&spPage=2