RE: Mounting GoPro - 2

Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.

By some strange coincidence, I've just taken a punt on these:

Werbung: https://www.ebay.co.uk/itm/BMW-S1000-xr-...ls/173286126407

for my Garmins. The indicators look identical, so...

Plus I can stop/start recording (on both) from my Zumo 390 sat nav.

Cheers

Paul B.

Zitat von Holger im Beitrag #18

---

arrived today |addpics|ktl-8-231e.jpg|/addpics|

---

I simply slapped a GoPro Mount on my screen for a track session. It was tricky to find a forward facing location with so many curves.

There was a bit of vibration at certain frequencies as it was far from a mounting screw, but generally ok.

Silly me didn’t mount it properly one time and it jumped right off at an inconvenient time. At the end of the session it took me a while to locate the camera in the case on the straight as it had bounced further away from the point where I was sure it departed the bike.

27EA3F60-EA7E-4B39-AC7A-BC0DD9FFB721.jpeg - Bild entfernt (keine Rechte)

I attached a GoPro with a bracket purchased from Italy. Here is a PDF detailing my experience. The GoPro camera is stable for video. The newer Hero 6 has some video stabilization that should also help reduce vibration.

Ride Safe,
Richard
Trinidad, CA

204BED96-5F64-4B29-AF7A-A1F25B093746.jpeg - Bild entfernt (keine Rechte)D7F443B4-2DD2-4920-B0B8-2B74F8F13B9E.jpeg - Bild entfernt (keine Rechte)B4513A48-3435-4B2F-B785-B19A16D6E480.jpeg - Bild entfernt (keine Rechte)1455E115-B58A-4873-9725-6FF04820C5E5.jpeg - Bild entfernt (keine Rechte)

Playing with some options. This is a bar mount on my aux light bracket with an adjustable ball mount.

Bored and decided to look at mounting options.

I had a handlebar mount ball and stem from another bike and found that the mirror bolts are M8, so similar to another post here created the mount there. The great thing is that it was free.IMAG1469.jpg - Bild entfernt (keine Rechte) (not sure the photo will work)

Looks interesting Elmer

Out on the bike today to test out the new MRA Windscreen (which is great BTW).

I decided to stick the GoPro on and take a run to the Kelpies and Falkirk Wheel. reviewing the video I noticed that there is a shudder at low speed / low revs which will be coming from the boxer engine. Image stabilisation is on.

Its not one of the expensive ones (it came free with broadband contract a few years ago and is known as a Hero (no number)), but does have stabilisation and worked perfectly on other bikes so.....

Which GoPro works best with the RS, has anyone had the same issue; do I need to invest in a better unit or will they all be the same? Mounting point as my previous post.