General topics » R1250RS Engine spoiler instructions - help needed

Happy Christmas everyone - looking for a bit of help. I have just purchased an R1250RS that has the winglets fitted to the lower front of the engine.
I have also sourced the stainless steel engine spoiler ( as per attached pic) - but without fiting instructions. Has anyone got a set they can scan and upload please ? Or some experience of installing.
It looks like 50% of the fittings are the same - which will save me some fiddling, but hard to know exactly which bits so any help will be appreciated Screenshot 2023-12-29 at 16.47.25.png - Bild entfernt (keine Rechte)Screenshot 2023-12-29 at 16.47.08.png - Bild entfernt (keine Rechte)

Zitat von andygriff im Beitrag #1

---

It looks like 50% of the fittings are the same - which will save me some fiddling, /f7t5272p57727n2_eTXduUvP.png|none]]

---

What Lee said. I think if you have the correct brackets it'll be self explanatory.

I can send pictures of my bike if it'll help.

Thanks for the replies - I have all the correct brackets - and the front section is 100% reusable from the winglets. The 'tricky' part is the sequencing of the rear engine spoiler bracket fixing with a plastic cable holder on the RHS. I think Ive sorted it but its always good to know how BMW intended it to be done. You end up having to pull some cables and a breather pipe out of the way. Still be good to see the fitting instructions if anyone has them . TIA.

Zitat von Paul911 im Beitrag #3

---

What Lee said. I think if you have the correct brackets it'll be self explanatory.

I can send pictures of my bike if it'll help.

---

Zitat von andygriff im Beitrag #4

---

Thanks for the replies - I have all the correct brackets - and the front section is 100% reusable from the winglets.

---