General topics » Lowering foot pegs

If anyone has fitted lower foot pegs,how did they adjust the gear lever to suit the lower pegs

The turnbuckle on the OEM linkage lets you adjust the lever over a short range.

Gear Lever.jpg - Bild entfernt (keine Rechte)

Thanks for that,I adjusted the turn buckle but gears didn' t seem to engage smooth

Adjusting the pedal position should not influence the “smoothness” of the gear change.

Once you have the pedal in a comfortable position W.r.t. your boot, just try changing gears at different speeds.

Ranging from walking pace to full bore red limiter if you like.

Don’t rely on the Quickshifter (if fitted) to give you smooth changes at low speeds. Or when not accelerating at a high-ish rate.

On a good day I can short shift at sedate speeds silently.

Zitat von Boxerboy55 im Beitrag #4

---

... Once you have the pedal in a comfortable position W.r.t. your boot, just try changing gears at different speeds.

---

Wenn Sie hier auf Links zu eBay klicken und einen Kauf tätigen, kann dies dazu führen, dass diese Website eine Provision erhält.

Zitat von wessie im Beitrag #5

---

Zitat von Granville Griffiths im Beitrag #3

---

Thanks for that,I adjusted the turn buckle but gears didn' t seem to engage smooth

---

I found the peg lowering kit made by MV pushed my foot outwards a little. This meant that sometimes I hit the tip of the shifter which is not optimal for smooth shifts and can get painful after a while. Easy to fix by adding a slip over extension such as ebay.co.uk/itm/143217501249 - this together with tweaking the gear lever position gives me a good shift

---