accessories » Fender extender

Looking for suggestions for a front fender extender for my 2020 1250RS. I don’t care for the MachineArt as it requires removal of the lower fairing. All help welcome.

I have a generic fender extender.PXL_20220416_195857543.jpg - Bild entfernt (keine Rechte)20190730_181307.jpg - Bild entfernt (keine Rechte)











Also pyramid plastic has a longer fender. https://pyramid-plastics.co.uk/collectio...ection-products

I also installed a Pyramid fender extender on my 2016 R1200RS about 3 years ago and have been happy with it during that time. No mounting or durability issues and it seems to conform to the curvature of the stock fender.

Pyramid fender extender ordered, machineart shock protector ordered. Thanks for the assistance.

I’ve used a Pyramid happily for 34,000 miles. Others had trouble with vibration.

I did use more sticky pads than Pyramid provided. 3M number plate stickies are your friend.

9CD018E9-1657-4B12-9506-3541F8BA2289.jpeg - Bild entfernt (keine Rechte)

Back in the earlier days some RS's suffered from the Fenda Xtenda slapping the tyre because the front mudguard rear part wasn't very rigid. I fitted some fibreglass sheet to reinforce this area underneath and out of sight.

35,000 miles and all is good. I have the front Avantguard too and the two don't touch.

I had two pyramid extenders, both attached with their 3M and both fell off. I gave up and opted for a PowerBronze extender (drilling in to fit their plastic rivets)

I have to say though that Pyramid were really good, after checking I’d followed their instructions to the letter, they gifted me the second extender and then gave me frame bungs as a good will gesture when the second fell off

So, what I’m saying is that it’s risky relying on 3M alone.

My extender is fitted with double sided tape no problem in 130k plus miles.

Curious, my first one fell off somewhere in Spain, and the second somewhere en route to the Tea Hut in Epping Forest. So either you’re lucky 👍 or I’m not 😞. 🤔

The decent chaps over at Pyramid thought that it might be something about the paintwork (mine’s a black 2020 model). That is also after I reassured them I’d followed their instructions to the letter.

I attached my with some nice button head screws for piece of mind after a nasty experience with a velcro headlight protector falling off and lodging under fairing and front mudguard. The result was a bike wanting to turn right while braking hard for a left hand bend😲🏍️

If the pyramid long fender was available at the time, I was looking for the extender I would have bought that and had it painted.

I’m a big fan of my Wunderlich one. It comes with brackets that bolt to the brake callipers, which means it is going nowhere and adds to the fender stability. I think I’ve posted photos before, I’ll try and find them.